Measurements for 5-Leaf Slipper Spring w/Hook End for 7,000-lb Trailer Axles e74SR

Updated 05/03/2018 | Published 05/02/2018

Question:

referring to this spring - page - diagram dia. B, is this an arbitrary measurement? I measure form center of spring eye to the Inside of the hook-down which i Get 26-1/2 dimension C my spring is 27 dimension A is about right, I have 11-1/2 I guess my question would be, on a hook down slipper spring How do YOU measure spring Length? I just dont think is spring is right for me I have a 7000 lb axle, dual axles, 5-leaf x 2.0inch wide, Trailer about 5 years old.

asked by: Dave H

Expert Reply:

The B measurement for slipper spring # e74SR is from the center of the eye to the part of the opposite end where it levels out after the bend. The spring eye center to the end is 26-5/8 inches. The overall length would be about 27 inches.

With worn springs they will flatten out some and have slightly different measurements than a new spring. That is likely what is going on here. Out of the available options for 2 inch wide slipper springs for 7,000 pound axles # e74SR is the best option based on your measurements.

expert reply by: Michael H