How are Inlet and Outlet Hoses Connected on FloTool Transfer Pump # FT10803?
Updated 04/16/2018 | Published 04/13/2018
Question:
what pressure can it produce? what are the inlet and outlet connections......Threaded?
asked by: Marty B
Expert Reply:
The FloTool Multipurpose Transfer Pump # FT10803 is not rated for pressure. It has the inlet hose at the top of the pump and the outlet hose as the bottom. They are not threaded but simply a press fitting. I've attached a video to assist. This is a very simple pump that will create a vacuum to let gravity assist with the transfer of fluid. It can also be used as a small air pump for light function like inner tubes of a bicycle or even a small vehicle. This is an entry level tool that will work very well on small jobs.
Product Page this Question was Asked From
FloTool Multipurpose Transfer Pump
- Fuel Transfer Pump
- Siphon-Style Pump
- Manual
- Diesel
- Gasoline
- Kerosene
- Light Oils
- Water
- 5 Gallon Buckets
- FloTool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: TeraPump Manual Fuel Transfer Pump for Racing Utility Jugs
- Shop: FloTool Multipurpose Transfer Pump
- Video: FloTool Multipurpose Transfer Pump Spec Review
- Video: TeraPump Manual Fuel Transfer Pump for Racing Utility Jugs Feature Review
- Q&A: Do I Have to Drill Holes in the 5AB-E1621-16K Skid Plate to Install a Demco Autoslide Locking Plate?
- Q&A: Comparing Ford OEM Reese 18k 5th Wheel Hitch to Other Factory Puck Options
- Q&A: Recommended Cover for a Demco Autoslide 5th Wheel Hitch
- Q&A: Dimensions for Demco Extended 5th Airborne Pin Box Capture Plate # 6062 Compared to # 6026
- Q&A: Determining Correct Locking Plate for Demco Hijacker with Reese 5th Airborne Pin Box
- Q&A: Recommended Demco Hijacker Locking Plate for 5th Airborne Pin Boxes
- Q&A: Is the Lippert 1621 an Extended Pin Box