Finding Dedicated Brake Light Circuit to Install a Trailer Brake Controller on a 2015 Chevy Equinox
Updated 03/21/2018 | Published 03/19/2018
Question:
Is the circuit you have on line which is for up to 2012 also good for the 2017 Chevy Equinox? That is the Black Connectorinch White wire on Pin11? Thank you.
asked by: Lawrence D
0
Expert Reply:
We have spoken with Tekonsha about the BCM pin to use for installing a brake controller in a 2017 Chevy Equinox and they still state that the correct pin is the 11 pin.
I would still recommend verifying the pin with a circuit tester like part # PTW2993.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Warm White 4-1/4" Diameter Puck Light
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Article: Brake Controller Installation: Starting from Scratch
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Suspension Enhancement Recommendation for 2003 Toyota Tundra with B and W Turnoverball
- Q&A: Will Timbren's Work with a B&W Gooseneck Hitch on a 2012 Ford F-150
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lights Not Working After Winter? Test Truck or Trailer