Superwinch LT2000 ATV Winch 1120210 Wont Retract

Updated 02/26/2018 | Published 02/24/2018

Question:

Winch unspools but will not go in. Replaced rocker switch first.no change. Got bulldog relay from you, swapped back and forth with original One way it unspools,other way nothing happens. I hear no clicking. Jumping with battery winch works both ways Did I buy the wrong part? They look identical Thanks

asked by: Bob

Expert Reply:

I spoke to my contact at Superwinch about your Superwinch LT2000 ATV Winch part # 1120210. They informed me that it sounds like the control box is faulty and will need to be replaced with part # SW2320200. The new control box will fix the winch and allow it to both extend and retract.

With that being said, if you are using this winch on a snowplow in which it is frequently extended and retracted you will want to upgrade the relay with part # SW87-42608 as the factory relay will have a difficult time keeping up with the constant extend and retract actions of the snowplow.

expert reply by: Conner L