Recommendation For Wet Leaf Spring Hanger Bolts And Bushings For Lippert 8,000-lb Axle
Updated 02/01/2018 | Published 01/31/2018
Products Featured in This Question
Question:
I have a 2011 DRV Elite Suites that has Lippert 8000 lb axles with a NV# 165201. I need a complete set of wet leaf spring hanger bolts and bushings. Is this something you can get.
asked by: Randel T
Expert Reply:
Based on your information, the closest bolts we have for your needs are 4-1/2 inches long.
The Redline Spring Eye Bolt with Grease Zerk, Item # 7-135-2, is a grade 5 bolt that is 4-1/2 inches long x 3/4 inches in diameter. A similar bolt from Redline, Item # 7-260-2, is a grade 2 bolt that is 4-1/2 inches long x 7/8 inches in diameter.
If you measure your bolts and bushings and send me the dimensions, I can make a specific recommendation.
Product Page this Question was Asked From
10K GD Spring Eye Bolt w/ Grease Zerk
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3/4 Inch Diameter
- 4-1/2 Inch Long
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: What is the Diameter and Length of the 10K GD Spring Eye Bolt with Grease Zerk, # 7-135-2
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Q&A: Correct Center Bolts And Spring Eye Bolt To Go With 13-140-3 Equalizer
- Q&A: Is The Diameter Of The Eye On The e29FV Leaf Spring 9/16 Or 3/4?
- Q&A: Replacement Shock for Dexter Axle 052-003-00
- Q&A: Replacement Equalizers For 2-1/2" Slipper Springs Mounted To 10,000LB Dexter Axles
- Q&A: Replacement Bushing For Dexter 5-Leaf 10,000 Pound Axle Slipper Spring DX45QR
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose a High-Low Adapter