Replacement Master Cylinder for Demco Drum Brake Actuator DM8101541

Question

Question:

Please provide the measurements for the bolt patter of this master cylinder. Does it fit the following Item # DM8101541

asked by: Dustin

0

Expert Reply:

The Titan Replacement Master Cylinder # T2336100042 is an exact replacement for their model Aero 7500 drum brake actuator. The correct Master Cylinder kit for your Demco drum brake actuator model # DM8101541 is part # 5650. This kit includes cylinder, lid, cap, and mounting hardware and it fits ALL drum brake actuators from Demco. The mounting hole pattern on this Demco part is 2 x 3-inches.

expert reply by: Adam R

0

Answer 1

The Demco Hydraulic Brake Actuator #DM72VR will replace your Atwood 171 actuator. This surge brake actuator will work for drum brakes and has no reverse lock out but is recommended that you equip your trailer with free-backing brakes so you can drive…

view full answer...

Answer 2

Yes, the Replacement Master Cylinder #T2336100042 is the same size as the master cylinder in the Replacement Master Cylinder Assembly #T4395100. They are the exact same thing in regards to the master cylinder, with the only difference being one is…

view full answer...

Answer 3

The #17 nut that you are referring to for your Aero-6000 actuator (similar to part #T63FR) looks like it simply helps to keep the latch in place. If you are having problems with your brakes dragging and overheating then either your disc…

view full answer...

Answer 4

It does not come with instructions but it is pretty easy to replace. For your Titan Aero 6000 the correct replacement master cylinder is item #T4395100. This is the replacement master cylinder that works with drum brakes. I was able to find an…

view full answer...

Answer 5

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 6

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 7

Hey Shaun, thanks for reaching out! The Dico Replacement Master Cylinder for Model 60 Actuator 23361 was replaced by the Replacement Master Cylinder Assembly #T4395100 so you'll want this instead of the Demco #DM24ZR you were looking at.

view full answer...

Answer 8

Hey Chris, what you'd want is the replacement Master Cylinder part #T4395100 as this is best rebuild kit solution we have for a Titan Model 60 for drum brakes. This replaces the entire master cylinder with all new parts.

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

I spoke with my contact at Demco and he said that there really is no difference between Demco Hydraulic Trailer Brake Actuator DA66B, #DM72VR, and the DA66 that you have on your trailer except the DM72VR has a capacity of 7000 pounds. Except for that…

view full answer...

Answer 11

I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like #L11390 have 14…

view full answer...

Replacement Master Cylinder for Demco Drum Brake Actuator DM8101541

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching