Spindle Grease Seals for 2.441" Hub Bore Bearing Buddies
Updated 11/19/2017 | Published 11/17/2017
Products Featured in This Question
Question:
I have 2 Dexter D52, 6 log axles on my travel trailer. I have 2.44 inch Bearing Buddies and would like to install Bearing Buddy Spindle Seals. Can you tell the size/part number of the Bearing Buddy Spindle Seals I need for my Axles.
asked by: Rick S
Expert Reply:
For a set of spindle grease seals that will work with the Bearing Buddy Bearing Protectors part # BB2441SS (2.441" hub bore), you will want to use the Spindle Grease Seal Set part # BB60011. The above kit comes with everything you will need for 1 axle or 2 hubs.
I have also attached a review video of the bearing buddy seals for you as well.
Product Page this Question was Asked From
Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.38 Inch I.D.
- 3.37 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Q&A: Is there a Replacement O-Ring that Sits at the Back of the Spindle Before the Backing Plate?
- Article: Most Popular Wheel Bearings
- Q&A: Is It Okay for Tires to Crack at Sidewall and Tread
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Q&A: Looking for 6 Galvanized U-Bolts that are 3 Inches Square with 7/16 or 1/2 Inch Diameter
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing