Compatibility of CIPA Top Mounted Clamp-On Blind Spot Mirror CM49805 on 2013 Toyota RAV4

Question

Question:

Will this clip-on blind spot mirror fit on my side mirrors?

asked by: D. G

0

Expert Reply:

The CIPA Top Mounted Clamp-On Blind Spot Mirror # CM49805 will fit on just about all passenger vehicle mirrors that have a gap between the top of the actual glass mirror surface and the mirror's outer housing. This small gap, shown in the linked photo, accepts the mounting clip on the bottom of the Blind Spot mirror.

I reviewed many photos of the mirrors on the 2013 Toyota RAV4 and they appear to be an excellent match for the CIPA.

expert reply by: Adam R

0

click to enlarge

Answer 1

The wheel part #460545MBPVD that you referenced is made in China but for a USA made wheel that's similar the part #AM20353 is same size.

view full answer...

Answer 2

The LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems #FCE48TASL you mentioned does use LEDs for the night vision function, but the side marker lights use incandescent bulbs. Even the FCE48TASH you mentioned uses the same…

view full answer...

Answer 3

That is an alternate number that we are aware of for the #FCE48TASL but we decided to keep the old number.

view full answer...

Answer 4

The CIPA Top Mounted Blind Spot Mirror part #CM49805 is a universal blind spot mirror that is not vehicle specific and works on most factory side mirrors. However, in order to determine an exact fit you would want to measure the thickness of your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Curt Adjustable Width Trailer Hitch Receiver #13703 referenced in your question is a universal type hitch that is designed specifically for RVs and trailers like yours. It will fit frame widths of 22 to 72 inches and work on box, C-channel, and…

view full answer...

Answer 8

Hello David, thanks for getting in touch. The 2019 GMC 1500 AT4 has a 2" lift, and the #AL88388 kit you mentioned has taller brackets to fit the 2" lift. I looked up the X31 model and it does say it has offroad suspension, but it didn't…

view full answer...

Answer 9

Hey Tom, yes that is correct you would need to use the spacer kit part #AL52420 with the Air Lift LoadLifter part #AL88288 on your 2024 Chevy Silverado 1500 based on the dimensions you measured since you have the Eibach lift kit. Will you be doing…

view full answer...

Answer 10

For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite #RED63RR. You can use it along with the Plug in Adapter #3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to be…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hello Sam, thanks for reaching out. The Air Lift #AL88288 you were looking at is a fit for the 2020 Chevy Silverado 1500. When you say 4/6 I assume you are referring to a 4" or 6" lift. The air bags can be used with a lift kit, but you will…

view full answer...

Compatibility of CIPA Top Mounted Clamp-On Blind Spot Mirror CM49805 on 2013 Toyota RAV4

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching