Recommended Swivel Jack Replacement for Shelby 5730

Question

Question:

Looking for a replacement for a Shelby 5730 trailer jack

asked by: Scott P

0

Expert Reply:

The Shelby 5730 I believe is a 1200 lb swivel jack with wheel. It is frame mounted.

For a comparable replacement, I recommend the Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs # FTJ12000101. This will fit trailers with up to a 3x5 inch trailer tongue. It has a zinc finish that is tested with a 600 hour salt spray. It is ideal for marine or recreational use.

expert reply by: Jason S

0

Answer 1

Hey Dan. If your jack mount has a 2-1/2" ring on it then the Round Snap Ring Swivel Jack w/ Footplate item #TJB-2002S-B is going to be your best option. This 2,000 lbs capacity jack attaches to the same size bracket that the Fulton item…

view full answer...

Answer 2

I believe the jack you are looking for a replacement for is a frame mounted, swivel jack, sidewind, that has a 2,000 lb capacity and a wheel caster. We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine…

view full answer...

Answer 3

It is possible the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit the same mount used by your Shelby 5776 jack but we do not have the exact dimensions of the mount used by your Shelby jack so you will need to take a quick…

view full answer...

Answer 4

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 5

We sell the individual parts of the hanger kit part #e99ZR separately so for everything minus the hangers you'd wan the #A252CB-GALV, the #TRSL313 for the shackle straps, #ABS54FR for the shackle bolt and then for nuts #TRFA916DLNZ.

view full answer...

Answer 6

Hello John, thanks for reaching out. The Westlake tires are made in China. This is the case for virtually all trailer tires. At this time, Goodyear is the only trailer tire manufacturer that still makes all of their tires here in the USA. Was there a…

view full answer...

Answer 7

The great thing about trailer jacks is that they are rated for the tongue weight of the trailer which for a 1,500 lb trailer like yours would be very light. Since Jet Ski trailers are normally pole tongue trailers the Fulton Round, Snap-Ring Swivel…

view full answer...

Answer 8

The 4-Leaf Double-Eye Spring part #e44SR is what I recommend using to replace your Dexter Leaf Spring 072-078-00. It's the same length but a slightly higher capacity, 4,400 lbs vs. 5,000 lbs which is not much so it won't really affect the…

view full answer...

Answer 9

We don't have the dimensions of the weld-on mount for your Shelby jack, but it looks similar to the Jack Mounting Bracket for Fulton Marine Jack - Weld-On #P9012-00. That mounting bracket uses a 1/2" bolt with pin holes measuring 3"…

view full answer...

Answer 10

For mounting a clearance light I recommend using a few self tapping screws. Preferably a #10 or #8 screw like the #101131802. You will also want some butyl tape #QR59FR, to weatherproof the screw holes. Hardware for these is basically generic and it…

view full answer...

Recommended Swivel Jack Replacement for Shelby 5730

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching