Recommended Weld-On Steel Spring Latch
Updated 08/22/2017 | Published 08/21/2017
Products Featured in This Question
Question:
Do you sell a spring latch with a steel base that is equivalent to part number SL716SS? We used these for some containers, but the rivets are failing so we want to replace these with steel based latches that we can weld on. Thank you
asked by: Matt M
0
Expert Reply:
The spring latch we have that is similar to # SL716SS is weld-on is the Weld-On Zinc Spring Latch # SL58W. The weld on surface is 2 inches long by 1-1/4 inches wide and the zinc coated pin extends 3/4 inch past the bracket. This is really the only spring latch we carry that isn't zinc plated or stainless steel. These should work well for your containers.
expert reply by:
Jason S
0
click to enlarge
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Drop Leg that Can be Used with etrailer A-Frame Jack
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Q&A: Recommended Hand Winch That Will Not Free Wheel When Not Cranking
- Q&A: Are There Hubs for a Straight Spindle with 1-1/4" or 1-3/8" Diameter
- Q&A: How to Determine if Slipper Spring SP-177275 Will Fit Trailer
- Q&A: Replacement Bearings and Seal for an Al-Ko 12K Axle
- Q&A: Dimensions of the Weld-On Zinc Spring Latch
- Article: Trailer Lighting Requirements
- Article: Trailer Hitch Installation Tips
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller Installation on a Ford Full-Size Van