Availability of Just the Brackets of the B and W Turnoverball Hitch BWGNRK1313

Question

Question:

Can I purchase just frame side plates for a turnover hitch mount? Will the main body of the hitch attach to other rails and frame plates? For instance Ford to Dodge.

asked by: Keith M

0

Expert Reply:

For just the rails of the kit you referenced part # BWGNRK1313 you would want the part # BWGNRM1313 which comes with everything except the center section.

expert reply by: Jameson C

0

Gerald R.

4/28/2020

Does the 5 1/2 and 6 1/2 take same mounting plates

Chris R.

4/30/2020

The 5-1/2 foot bed likely requires different mounting brackets. If you can tell me your truck model I will be happy to make a specific recommendation.

Chris R.

4/30/2020

The 5-1/2 foot bed likely requires different mounting brackets. If you can tell me your truck model I will be happy to make a specific recommendation.

Mark M.

8/9/2020

- B&W GNRC959N i have this hich but need bracket kit to install in a 2004 chevy 2500 hd 6.5 bed

Jon G.

8/19/2020

If you already have the Center Section # BWGNRC959 then you just need the Rail Kit # BWGNRM1067 to fit this to your 2004 Chevy Silverado 2500HD with the 6-1/2' bed.

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

Hey Brian! It looks like you decided to go with the MORryde GooseTech #MR27MV, which is a great option. However, the GVWR of your 2023 Keystone Montana 3231CK is 16,680 lbs and this is designed for 18k+. Also, did you verify that your pin box bolt…

view full answer...

Answer 10

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 11

Welcome back John! I'm going to need a bit more information to confirm the MORryde GooseTech item #MR57MV is the correct one. I checked with the manufacturer and your 2024 Dutchman Astorian 230ML 5th wheel trailer comes standard with a Curt…

view full answer...

Answer 12

Hey Travis! The right MORryde GooseTech depends on the pin box bolt pattern and GVWR of the Solitude 310GK. If it is a little older it probably has a Lippert 1621, I believe the newer models use the Lippert Rhino. You can ask whoever you're…

view full answer...

Availability of Just the Brackets of the B and W Turnoverball Hitch BWGNRK1313

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching