Available Replacement Arms for Solera Awning
Updated 08/03/2017 | Published 08/02/2017
Products Featured in This Question
Question:
I need a part number for the upper pitch arm shown in the attached picture. The arm is 13-3/4 inch long. The upper end is 13/16-inch square. The lower end is 3/4-inch square. I need to replace the broken arm before the awning suffers additional damage. Thank you for your attention.
asked by: John C
Expert Reply:
There is a solution for you, though the upper pitch arm you referenced is not available as an individual piece. It will come with a support arm assembly, and the one you need is going to depend on the length of the wall-mount extrusion from top to bottom. The short style measures 61-1/2" and uses # LC351829 while the flat style will measure 69" and use # LC281154.
Continue Researching
- Shop: Replacement Pitch Arm for Solera Flat RV Awnings w/ 69" Long Support Arms - Black - Qty 1
- Shop: Replacement Extension Rod for pre-2022 Solera RV Slide-Out Awning - Black - Qty 1
- Video: Review of Lippert Components RV Awning Parts - Replacement Pitch Arm - LC375994
- Video: Review of Lippert Components RV Awnings - Replacement Pitch Arm Assembly - LC74VR
- Shop: Replacement Retaining Washer for Solera RV Awning Pitch Arm - Qty 1
- Shop: Solera Classic Universal Arms for Manual Pull-Style RV Awnings - 68" to 81" Long - White
- Shop: Replacement Pitch Arm for Solera XL Flat RV Awnings w/ 63" Long Support Arms - Black - Qty 1
- Shop: Replacement Support Arm Assembly for Solera Flat RV Awnings - 69" Long - Black - Qty 1
- Shop: Replacement Pitch Arm for Solera XL Flat RV Awnings w/ 78" Long Support Arms - Black - Qty 1
- Shop: Trailer Hitch