Dimensions of Timbren Front Suspension Enhancement # TUMDF70

Updated 07/26/2017 | Published 07/25/2017

Question:

Can you verify the mounting hole spacing on the vertical flange as being 3inch apart? Timbren TUMDF70. This is for a 2008 Ford F550. We need this part for the rear although it states it is for the front. The factory overload stop on the rear has what appears to be the same mount, thus the need for the 3inch spacing. The current rubber and mount is 3 1/2inch tall. we need it to be taller. Can you tell me the length on that too. Thank you. The picture is of the current rear overload stop.

asked by: Leslie R

Expert Reply:

Unfortunately, I wasn't able to get the exact measurements for you. I contacted Timbren because we don't have the # TUMDF70 in our warehouse.

They did tell me the bolt holes will line up with the frame for their application. So you can compare them to the bolts on the front of your truck you should be able to verify the 3 inches.

The height of the spring itself is 5-1/8 inches so it'll definitely be taller that what you have. The bracket will add maybe another 1/4 inch or so.

expert reply by: Charles S