Is Plug-in Adapter Available To Install Brake Controller On 2016 Chevrolet Colorado
Updated 07/24/2017 | Published 07/20/2017
Question:
Tekonsha Accessories and Parts - 3015-P - is there an equivalent wiring adaptor for a 2016 Chevrolet Colorado?
asked by: Terry F
0
Expert Reply:
There is no plug under the dash of your Colorado, so you will have to hardwire your brake controller. The wires are located on the left side of the truck behind a kick panel on the driver side.
I have attached a link to an installation video you can check out to see how the brake controller is installed. You can use a circuit tester like part # PTW2993 to check the wires by function.
expert reply by:
Jeffrey L
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Q&A: Recommended Warm White 4-1/4" Diameter Puck Light
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Q&A: Will Timbren's Work with a B&W Gooseneck Hitch on a 2012 Ford F-150
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lights Not Working After Winter? Test Truck or Trailer