Brake Controller Recommendation for 2014 Dodge Durango with 7-Way Adapter Installed

Updated 06/30/2017 | Published 06/29/2017

Products Featured in This Question

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$160.52

10 Gauge Wire - Blue Primary - Per Foot

(104)

$1.89

Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers

(159)

$57.19

Question:

Hello. I have a 2014 Dodge Durango. I installed the Draw-tite 75713 Hitch, the Curt 56198 Wiring Harness, and the Curt 57184 adapter last week. I would like to install a brake controller but Im having trouble understanding which one to buy. I like the Tekonsha controller but dont know if I need the one with the adapter or not. Any help will be appreciated.

asked by: Gilberto R

Expert Reply:

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

Next, for a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle to find a circuit that has voltage when the brakes are applied and none when not applied. This will be the circuit you will run the red wire to.

Finally you will need to run a length of 10 gauge wire (part # 10-1-1) from the brake output circuit of the controller to the brake output circuit of the 7-way (blue wire). The # 10-1-1 is sold by the foot so you will need to order a quantity of the amount of feet you will need.

expert reply by: Jameson C