Vent Cover Recommendation for Ventline Roof Part # VD0433

Question

Question:

I have a vd0433 base need cover. What is part number, please.

asked by: Roy H

0

Expert Reply:

Based on the number you listed the cover you are looking for is the part # BVD0449-A01 for a white cover or the part # BVD0449-A03 for a smoked color.

expert reply by: Jameson C

0

Answer 1

The correct replacement for your VDO 433 / VDO 434 is going to be the: -Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This part includes the replacement screen with the screen frame, however if you…

view full answer...

Answer 2

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 3

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Answer 4

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Answer 5

You did indeed see a video showing how to replace the vent lid #BVD0449-A01. I have linked that video for you here as well. IT was one that I made a while back and that is probably where you saw it.

view full answer...

Answer 6

If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part #BVE0108-03. This dome is designed to fit #V3092-601-00, #V3092-603-00, #V3094-601-00, #V3094-601-00C, #V3094-603-00, and…

view full answer...

Answer 7

The best way to determine if we have a replacement cover that will fit your trailer vent is to locate the manufacturer name or model number of your roof vent. If you are unable to locate this information you will want to measure the vent opening as…

view full answer...

Answer 8

Hey Doug, for your Ventadome V3094 the vent cover you would want would be the MaxxAir part #MA00-933069 which is a universal style vent cover. We don't have anything that is custom fit for the Ventadome at this time.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 11

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 12

You will have no problem using a Dexter brake assembly on a Lippert 7K axle. We have installed several Dexter brake assemblies on Lippert axles at our shop. Lippert and Dexter use the same standard mounting pattern and brake sizes. If you want…

view full answer...

Vent Cover Recommendation for Ventline Roof Part # VD0433

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching