What Tools are Needed to Install the Draw-Tite Hitch # C11041 on a 2001 Ford Mustang
Updated 03/16/2011 | Published 03/14/2011
Products Featured in This Question
Question:
how to install it what do i need and how long is it
asked by: Alex
Expert Reply:
If you have average mechanical abilities and basic tools this Curt, part # C11041, would take about 40 minutes to install on your 2001 Ford Mustang.
I attached installation instructions below that detail exactly how the # C11041 will install on your Mustang, there are also many useful diagrams that show how it all comes together too.
You will need the following tools:
13 mm wrench, 15 mm wrench, 11/16 inch wrench, torque wrench, a drill with a 1/4 inch drill bit, 7/16 inch drill bit, and a 1 inch hole saw.
You may be interested in purchasing the following:
Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch drop, part # 3592
Hitch Ball with 2 inch Diameter and Short Shank, part # 19258
Hitch Ball with 1-7/8 inch Diameter and Short Shank, part # 19256
Curt T-Connector # C55326
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Hitch for a 1997 Ford Mustang GT w/ Dual Exhaust
- Q&A: Will Curt Hitch part # C11041 Fit a 1997 Ford Mustang GT
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Q&A: Fan-Tastic Roof Vent Operator with Roller on Left Side of Arm
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Correct Firestone 7500 Air Bags for a 2012 Chevy Silverado 3500 Dually