Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2000 Saturn S Series  

Question:

Expert Reply:

The major difference between Roadmaster Base Plates, # 162-2 and # 162-3 is that the 162-3 only goes up to 1999 models of the Saturn SL 1 and SL 2 series. Since you have a 2000 you would use Roadmaster XL Base Plates, # 162-2.

In addition to the base plates, there are several items you will need to flat tow your 2000 Saturn S series. For a tow bar, I recommend the RoadMaster Tracker Tow Bar, # RM-020 with Quick Disconnects # RM-201. I have included a link to the installation details for the tow bar for reference.

To complete the towing set up for your Saturn, you will need safety cables, lighting, and a supplemental braking system as required by law. For safety cables, I recommend RoadMaster 64 inch Single Hook, Coiled Safety Cables, # RM-643. For lights, there are a couple of options. If you do not plan on towing the Saturn often, I recommend magnetic light kit # RM-2120.

If you do plan on towing it frequently, I recommend installing diodes, # 38955. I have included a video along with a couple of FAQ articles on tow bar wiring that should help in choosing the best light kit for your application along with how to go about wiring them.

For a braking system, the easiest to use and install would be the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This system installs quickly so you are ready to go in minutes. It engages the towed vehicle brakes proportionally to how much the towing vehicle is braking, reducing wear of both vehicles brakes.

Finally, you will need to check with the manufacturer and/or your vehicle owners manual for instructions on the proper procedure for towing your vehicle because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.

expert reply by: Michael H

0