Will The Derale Combination Transmission and Engine Oil Cooler Part # D15902 Fit My 2011 Tacoma
Updated 05/23/2017 | Published 05/22/2017 >
Products Featured in This Question
Question:
Will the combination engine and trans cooler fit on my tacoma V6 2011. And is the thermostatic sandwich adaptor for the engine oil is included??? cause on the picture and the description part list, we can see the thermostatic sanwich adaptor .. .. . but on the video, the thermostatic is for the trans fluid not the engine oil. I am also looking for a small gauge for the trans fluid temperature. .... What trans fluid temperature gauge would you recommand .. . . Thank you for your time....
asked by: Marc L
Expert Reply:
Transmission and engine coolers are universal in that the manufacturers do not test the fitment and performance on individual vehicles. To ensure a proper fitment on your 2011 Toyota Tacoma, you will need to measure the amount of space you have in front of the radiator/condenser free of obstructions. The current cooler you have selected in the Derale Combination Transmission and Engine Oil Cooler part # D15902 has dimensions of 17" wide x 12-1/2" tall x 3/4" deep. We have not had a chance to install an aftermarket cooler on a 2011 Toyota Tacoma, so our typical recommendation is to use the largest cooler that will fit the space you have available in front of your radiator/condenser.
The universal thermostatic sandwich adapter included in the kit has a built in thermostat. I believe what you are referring to in the video is our Derale Fluid Control Thermostat Kit part # D13011, which is not included in the kit. The fluid controller will allow for you to bypass the cooler when the temperature of the fluids have not reached the minimum 180 degrees required for the thermostat to open the bypass valve.
In order to see the temperature in which your transmission fluid is operating at, you will also want the Derale Temperature Gauge Kit for Transmission or Engine Oil part # D13009.
Product Page this Question was Asked From
Derale Combination Transmission and Engine Oil Cooler with Multiple Threads
- Transmission Coolers
- Transmission and Engine Cooler
- Standard Mount
- 17W x 12-1/2T x 3/4D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Brake Controller Installation Instructions For 2008 Toyota Highlander
- Q&A: Replacement Slide Out Motor Options for Power Gear K01265B300 and K01265Y500 Motors
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Installing Derale Series 8000 Transmission Cooler # D13503 On A 2016 Dodge Grand Caravan
- Q&A: Recommended Battery for a 12,000 Lb. Electric Car Trailer Winch
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Difference Between Underslung and Overslung Coupler For Weight Distribution System
- Q&A: Load Leveling Capacity of the Firestone Standard Air Spring # F6401
- Article: Transmission Cooler
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches


