Recommended Trailer Hitch for Bike Rack on 2004 Honda Civic Coupe
Updated 04/28/2017 | Published 04/27/2017 >
Products Featured in This Question
Question:
Im interested in installing a hitch for a bike rack on a 2004 Honda Civic Coupe. Am I likely to have a problem with the hitch or rack hitting the ground coming in and out of driveways?
asked by: Mike
Expert Reply:
For a trailer hitch on your 2004 Honda Civic Coupe, I recommend the Curt Trailer Hitch Receiver # C11204. The hitch should not hang too low below your vehicle frame to cause issues with ground clearance.
This is a Class I trailer hitch with a tongue weight capacity of 200 pounds, although you will also want to check the vehicle's capacity as listed in the owner's manual. I have attached the installation details for you to check out.
When choosing a hitch-mount bike rack, you will just need to make sure that the rack is compatible with Class I trailer hitches. I recommend looking at the Swagman XC 2-Bike Rack Platform Style # S64650. This platform rack will carry up to 2 bikes at 35 pounds each and the arm can fold down for easy rear cargo access. The nice thing about this rack if you are concerned with ground clearance, is that it has a 4 inch rise on the shank, which will place the wheel hoops well above your trailer hitch receiver.
I have attached a video review of this rack along with a link that will take you to our available selection of hitch-mount bike racks that are compatible with Class I hitches.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will Curt Trailer Hitch Receiver Fit 2005 Honda Civic EX Special Edition Coupe
- Q&A: Anti-Rattle Device Recommendations for 1-1/4 inch to 2 inch Hitch Adapter
- Q&A: Sealant Needed When Installing Curt Hitch in 2002 Honda Civic Si
- Q&A: Adjustable Ball Mount That Has 2-Ball Mount and The Ability To Tow a Pintle Trailer
- Q&A: Replacement Brake Actuator for UFP-47729 or Dexter 099-075-00
- Q&A: Replacement Trailer Hub Seal for TCM 12194TC
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Receiver Sizes
- Article: Hitch Adapters and Extenders
- Article: Performance Chips and Modules


