Transmission Issues & Cooler Installation in 2009 Nissan Rogue with CVT Transmission
Updated 04/18/2017 | Published 04/17/2017 >
Question:
Good afternoon, I own a 2009 Nissan Rogue, and I have been encountering loss of power on long drives wont go past 80km/h after 2-3 hours of driving, along with a whining that starts at this time. I keep reading that this is a common occurrence with 2008-2014 Nissan Rogues, due to the CVT overheating the transmission fluid and triggering a limp mode. As my mileage is over the extended warranty kilometers for a replacement transmission, I was thinking of having this installed to cool the transmission. I am looking at your Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient, Item # D13503, which does say it is compatible with my model. Can you confirm that this would be a good solution to the issue, and that all parts are included for installation to my model? Thanks!
asked by: Arwen B
Expert Reply:
CVT transmissions can pose a challenge for installation of an aftermarket auxiliary transmission cooler like the Derale # D13503. It can be tough to find the external return line (from the radiator's integrated cooler) which is where a Derale unit will be installed. Some Nissan CVT transmissions are completely sealed, with no way to access the fluid at all. The other issue is that some CVT fluid is very costly and in some cases you may need to spend a substantial amount on fluid for the system which now will have a higher fluid volume capacity due to the cooler core and hoses.
If you can find an external return line which takes cooled fluid back to the transmission then you can install a cooler like # D13503 to further drop its temperature. This kit includes all parts needed to mount it. You will first need to confirm that your Rogue has external lines that will allow you to tap into the system.
According to our several techs I spoke to Nissan transmissions are not exactly renowned for their durability. So if you have 200,000 miles on the vehicle, and/or if you tow near its maximum capacity, then the issue may simply be a worn out transmission. A cooler will not correct for existing wear or damage but it will help a transmission in good condition stay that way.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Hitch, Wiring, Brake Controller, and Transmission Cooler for a 2006 Honda Pilot
- Q&A: Transmission Cooler Recommendation for 2018 Nissan Frontier
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Transmission Cooler For 2007 Honda Pilot 4WD
- Q&A: Does The Redarc RED82CR Come With The Switch Panel For A 2008 Toyota Tacoma?
- Q&A: Recommended Transmission Cooler for a 2018 Nissan Altima
- Q&A: When To Use a Weight Distribution System When Towing with a 2011 Honda Odyssey
- Q&A: Weight Distribution Replacement Solution Reese Mini 350 with Lost Components
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Timbren Suspension Enhancement Systems



