Will Curt Class III Trailer Hitch # 13245 Fit a 2009 Jeep Liberty with 2 Wheel Drive

Updated 02/10/2011 | Published 02/09/2011

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(322)

$226.16

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(465)

$31.67

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(181)

$74.77

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2621)

$11.37

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.62

2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(2621)

$15.90

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

(3842)

$30.92

Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span

(895)

$13.90

Question:

I didnt see a listing for a 2009 2WD Jeep Liberty. Will the Curt Class III Trailer Hitch fit a 2009 Jeep Liberty 2WD? Wouldnt the frame, etc. be the same as a 4 wheel drive?

asked by: Robert P

Expert Reply:

Any of the trailer hitches listed for the 2009 Jeep Liberty will fit any model, 2 wheel drive or 4 wheel drive. This includes the Curt Class III Trailer Hitch, # 13245, that you have referenced. I have included a link to the installation details for reference and a link to all of the available hitches for the 2009 Liberty.

If you plan on doing some towing with the hitch, the recommended ball mount is # C45010 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 63845 (2 inch diameter) or # 63847 ( 2-5/16 inch diameter).

For trailer wiring, there are 2 options. If the Liberty has the factory tow package, use 4-Pole Trailer Adapter, # 118384, if needed. If your Liberty does not have the tow package, use T-One Vehicle Wiring Harness with 4-Pole Trailer Connector, # 118554.