Measurement From Base To Inside Peak Of The Brophy Safety Chain Mounting Bracket
Updated 03/27/2017 | Published 03/24/2017
Question:
Brophy Code: MB38 Can you tell me the height from the base to the underside of the formed peak on this safety chain bracket?
asked by: Reed
0
Expert Reply:
From the base to the underside formed peak on the Brophy Safety Chain Mounting Bracket - 4" Long x 3/8" Diameter - Weld On - Qty 1 # MB38 the measurement is 3/4 of an inch. I've attached a video that give you this measurement for a visual as well as others to assist.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Brophy Safety Chain Mounting Bracket - 4" Long x 3/8" Diameter - Weld On - Qty 1
- Accessories and Parts
- Tow Bar
- Trailer Safety Chains
- Safety Chain Parts
- 3/8 Inch Diameter
- Mounting Brackets
- 4 Inch Long
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Outer Diameter of Weld-On Pipe Coupling on Trailer Valet JX Trailer Jack
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Gooseneck Hitch Adapter for Truck with Rails a B&W Patriot Hitch Fit
- Q&A: How to Measure Trailer Frame Angle for Coupler
- Q&A: What Grade Bolts to Install Demco A-Frame Cast Head Coupler
- Q&A: How to Select the Proper Length Safety Chains for a Trailer
- Q&A: Are 1/4 Inch Grade 70 Safety Chains Sufficient For a 10,000LB Trailer?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)