Dexter Axle 3,500 Pound Axle for Enclosed Trailer
Updated 02/16/2017 | Published 02/15/2017
Question:
Im build my first enclosed trailer that will be 8 1/2 ft wide is your 89inch axle the one I need? And the 74inch spring center what Ill need for center on frame?
asked by: Travis W
Expert Reply:
The 74 inch spring center will be roughly the width of your trailer's frame center to center. If this is accurate for your application the # 35545I-ST-89 Dexter axle is the appropriate length.
It's rated for 3,500 pounds and includes the idler hubs, bearings, races, seals, grease caps, wheel studs, lug nuts, and grease. The bolt pattern on the hubs is 5 on 4-1/2.
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Should Leaf of Trailer Leaf Spring be Removed to Lower Capacity
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Leaf Springs for 2022 Grand Design Solitude With 7k Axles
- Article: How to Measure a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Will a Furrion Chill Cube RV Air Conditioner Fit the Some Cutout as a Dometic AC?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Comparison Between the Tekonsha P2 # 90885 and Primus IQ # TK90160 Electronic Brake Controllers
- Q&A: Does etrailer Trailer Axle Beam e53GR Use L68149 and L44649 Bearing Combination?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Q&A: Can I Replace 2-5/8" Long Shackle Straps With 2-1/4" Shackles?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?