Will Classic Accessories Fifth Wheel Hitch Cover CA80116 Fit Curt Q24 Hitch

Question

Question:

I have a Curt Q24 direct mount hitch in my Ram truck fits factory fifth wheel prep package. Will the Classic Accessories cover fit this hitch setup? If not, is there another cover you recommend? Thank you for your help.

asked by: John J

0

Expert Reply:

We pulled a Classic Accessories Cover, part # CA80116 from our warehouse and installed it over a Q20 hitch which is the same size as a Q24.

I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black vinyl and measures 24 x 24 x 18 inches. It also features elastic cords with hooks that secure the cover to your fifth wheel rails.

expert reply by: Jameson C

0

click to enlarge

Jason S.

5/18/2020

Recommended Cover for B&W Companion RVK3715 5th Wheel Hitch

Chris R.

5/21/2020

The best option we have to cover your Companion is the Classic Accessories # CA80116. This will cover most of the hitch but a portion of the legs will still be exposed. If you check out the pictures on the product page there are a couple customer-submitted photos of it being used on the Companion. There isn't a Companion-specific cover available.

Answer 1

I reached out to my contact at Demco, and they said the 18K Hijacker autoslide #DM8550034 weighs enough that the slider portion could engage in that operation. They do not recommend putting that weight on the hitch and kingpin/pin box. Your best…

view full answer...

Answer 2

I do have an option for you but was unable to locate one specific to the B&W. We have Cover #CA80116. The cover is sized to be universal fit with measurements of 24" wide, 24" length and 18" tall. It utilizes 4 hooks or straps to…

view full answer...

Answer 3

I pulled a Classic Accessories Cover, part #CA80116 from our warehouse and installed it over a Q20 hitch. I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Classic Accessories Fifth Wheel Hitch Cover CA80116 Fit Curt Q24 Hitch

Product Page this Question was Asked From

Continue Researching