Recommendations to Improve Ride While Towing 13,800 lb Boat Trailer with 2015 Ford F-350
Updated 02/15/2017 | Published 02/13/2017 >
Products Featured in This Question
Question:
The truck Im pulling my trailer with is a 2015 Ford F350 with a 2 or 2 1/2 inch receptacle for the trailer ball mount. With a weight distribution system it will tow 19K. Without I believe 14k both with the 2 1/2 in ball mount. With 2 inch it will tow up to 12.5k. I have a large aluminum I beam boat trailer that the tongue extends for about 38 inches before the Y. With the brackets mounted I would need about a 40 inch bar to get to a spot on the Y. I was looking at RP66006 or is there another model that extends approximately 40 inches? The trailer loaded with my boat weighs approximately 13800 lbs and the tongue weight is approximately 1360 lbs . Also the I beam is about 5 inches across the top so I will need to have the bracket modified I guess to be able to attach it. It does sway quit a bit so I am looking for something with both level loading and sway control.
asked by: Roger C
Expert Reply:
I have a couple of options to improve your ride while pulling your boat trailer with your 2015 Ford F-350.
If you want to try and use a weight distribution system, the only option will be to use a system along with a Pole-Tongue Adapter like the Reese # RP58393, because there are no weight distribution systems available with arms that will be long enough to reach your trailer frame. The adapter platform will provide mounting space on your trailer tongue for the lift brackets of a weight distribution system like the Curt MV # C17063. The adapter plate will fit onto trailer tongue widths of 1-5/8" to 5" and tongue heights of 3" to 6".
Keep in mind that this is the highest rated adapter we have available with a tongue weight capacity of 1,400 and gross trailer weight of 14,000lb, so it may be a bit underrated for your setup if your estimated trailer weights are correct.
Otherwise, the next best option will be suspension enhancement for your 2015 Ford F-350. I recommend an air spring kit like the Air Lift LoadLifter 5000 for your rear axle, part # AL88396, to help improve any sag on the rear of your vehicle and counteract the instability that towing your heavy boat trailer is causing. These offer up to 5,000 lbs of support and can be manually adjusted so you can have a smoother ride, whether you are carrying a lighter load or towing your 13,800 lb boat trailer.
I have included a video demonstration of this product for your review.
Product Page this Question was Asked From
Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
- Vehicle Suspension
- Towing/Load Leveling
- Air Springs
- Suspension Only
- Heavy Duty
- Rear Axle Suspension Enhancement
- Air Lift
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Should I Get Loadlifter 5000 Or 7500 For Towing A 15K Fifth Wheel
- Q&A: Air Bag Kit for 2016 Ford F-250 Compatible with B&W Turnover Ball Hitch
- Q&A: Air Lift LoadLifter 5000 Ultimate Compatibility With B&W Turnover Ball On a 2016 Ford F-250
- Q&A: Recommended Best/Better Air Spring Suspension Enhancement for 2012 Ford F-350 Dually 4x4
- Q&A: Can The Firestone Air Bag Kit F2703 Be Mounted In A 2012 Ford F250 With B&W Turnoverball Installed?
- Q&A: Will This Hitch Fit with the Air Lift LoadLifter 5000 Helper Springs
- Q&A: Can I Install Airbags with my B&W Gooseneck Turnover Ball on my 2011 Ford F-350?
- Article: Should You Add an Air Compressor to Your Air Bags?
- Article: How Much Trailer Can I Really Tow
- Article: How Much Solar Power Do I Need For My RV?
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box


