Inner and Outer Diameter for Hinge Pin Nipple HPN214
Updated 02/07/2017 | Published 02/06/2017
Question:
What are the true decimal dimensions for this part? I want it to match up with what I have. ?Im trying to rebuild an existing hinge. I need the ID and the OD dimension.
asked by: Tim R
Expert Reply:
I went out to the warehouse with some digital calipers to measure the inner and outer diameters of Hinge Pin Nipple # HPN214. The inner diameter of the nipple is 0.52 inches. The outer diameter of the nipple is 0.754 inches. Keep in mind that due to manufacturer tolerances these measurements can vary slightly from one nipple to the next. The nipple is 2.25 inches long and that dimension would not vary much if at all from one nipple to the next or subsequent nipples manufactured in the same batch.
Product Page this Question was Asked From
1/2" Diameter Hinge Pin Nipple, 2-1/4" Long
- Accessories and Parts
- Trailer Door Hinges
- Trailer Door Parts
- Hinge Pin Nipples
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Tell if 1997 Ford F350 Has Overload Springs
- Q&A: How to Install Redline Round Rubber Bumper # D3-96 on Trailer With 2-Inch Thick Material
- Q&A: Repairing Pinhole Leak on High Country Plastics 25 Gallon Water Caddy
- Q&A: How to Install Redline Pre-Drilled Round Rubber Bumper # D2-96
- Q&A: Rubber Bumper for Stock Trailer
- Q&A: Could Pre-Drilled Round Rubber Trailer Bumper # D3-96 Replace Bumper with Different Hole Spacings
- Q&A: Replacement Cap for 25 Gallon Corner Water Caddy Stand ZC-100638-N Recommendation