V2062 Replacement Fan and 100CFM Motor Specs Plus Foam Inserts for Trailer Roof Vents
Updated 01/19/2017 | Published 01/18/2017
Products Featured in This Question
Question:
I have two Ventline V2062 exhaust fans in my mobile home bathrooms. One is the original motor and fan and it has a five-blade fan. Your suggested replacement is a three-blade fan which is what I have in the other bathroom. The three-blade fan is MUCH noisier than the original five-blade. Do you have a five-blade fan for this application? Also, what is the motor speed for the 100 cfm fan? Do you also offer the foam damper that goes above the fan in the duct? Thanks for your help.
asked by: Wayne
Expert Reply:
The only 5-blade fan still available from Ventline is # BCD0311-00 and it is for range hoods over a stove. The AC powered motor, # BCD0314-00 as an example, operates at 60Hz and 1 revolution per minute is equivalent to 1/60 Hz. So at 60Hz that is approximately 3600 RPM.
We do have some roof vent insulators such as # CAM45195 and # CAM45192 which fit 14x14 inch openings. These are the only such items we have.
Product Page this Question was Asked From
Replacement Fan Blade for Ventline RV Range Hood - 5-5/8" Diameter
- Accessories and Parts
- RV Range Hoods
- RV Vents and Fans
- Range Hood
- Fan Blade
- Ventline
more information >
Continue Researching
- Q&A: Replacement Fan Motor, Blade, Filter and Lens Cover for Ventline DPI-1 Range Hood
- Q&A: Replacement Parts Available for a Ventline PR-4 Range Vent Hood
- Q&A: Can Ventline Model V2262-50 be Upgraded to 100 CFM Motor
- Q&A: Ventline V2244-100 Vent Fan Replacement Motor
- Q&A: Replacement Shroud for Coleman 7330-713 RV Rooftop Air Conditioner
- Q&A: Possible Replacement for Coleman Mach Air Shroud
- Q&A: Replacement Motor & Fan Blade for Ventline Single Speed Range Hood PI-1
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)