Available 6K Weld-On A-Frame Drum Brake Actuators
Updated 01/04/2017 | Published 01/03/2017
Products Featured in This Question
Question:
Assuming I can grind off the old unit that has never worked, is a direct replacement available, or am I going to have to go bolt-on? Alternatively, if I accept that I wont have lock-out functionality, I guess I could refurbish this unit. Does this look do-able to you?
asked by: Brian Y
Expert Reply:
Thank you for the photo of your trailer tongue and actuator coupler.
The one weld-on 6K drum brake actuator we offer is the Titan Multi-fit A-Frame Actuator # T2492800. This accepts 1-7/8-inch, 2-inch and 50mm hitch balls and includes a breakaway kit. It will fit 50-degree a-frame trailers. Note that this coupler does not include a reverse lockout so it best paired with free-backing brakes like # T4423400 and # T4423500.
All 6K drum brake actuators for 2-inch balls are shown on the linked page. You can click on the filters to narrow the selection shown.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Q&A: Replacement Actuator For An Atwood 171
- Q&A: How To Determine If Demco Actuator For Drum Brakes Will Fit
- Q&A: Is 4-Bolt Brake Flange Needed to Install 3,500 lb Hub & Drum AKHD-655-35-K
- Q&A: Solution for Needing Replacement Parts for Atwood Surge Brake Coupler
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Mounting Bolt Dimensions of Demco Actuator DM72VR
- Shop: Brake Controller
- Search Results: akhd~545~35~ez~k
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)