Replacing a Spindle on an Enclosed Trailer Axle
Published 12/02/2008
Question:
how is this spindle TRU74FR replaced, or how do i take off the bad spindle and put the new spindle on. 3500lb dexter torsion axle, ez lube, for a us cargo 16 ft. enclosed trailer, it has a bad spindle on 1 of the axles.
asked by: Tony
0
Expert Reply:
When replacing the spindle on your trailer with a EZ Lube Spindle, part # TRU74FR, you will need to cut off the existing spindle and weld a new one in place.
I strongly recommend you take it to a qualified machine shop to have the appropriate welds done.
expert reply by:
Amanda
0
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Article: Trailer Wiring Diagrams
- Q&A: What Inner and Outer Bearings Does 3,500 lb Axle Disc Brake Kit Use
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Q&A: Can Curt Tow Bar be Used with Blue Ox Base Plate Kit
- Q&A: Do You Have a Furrion Chill Cube AC Unit w/a Heat Pump?
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle