How to Tell if Trailer Hub 8-258 Will Fit Spindle
Updated 12/05/2016 | Published 12/04/2016
Products Featured in This Question
Question:
This drum seems to be unavailable. My research indicates maybe I can you 8-285. Could you verify this ? Thanks,
asked by: Jeff C
Expert Reply:
We do have the Dexter trailer hub and drum part # 8-285-9UC3 which might work but you would need to verify a few things.
This is an 8k oil-bath hub with a bolt pattern of 8 on 6-1/2 inches. The bearings it takes are 25580 Inner / 02475 Outer. You would need to pull the hubs you have to get the bearing numbers or the dimensions where the bearings ride. If those dimensions are 1.74 inch and 1.25 inch this hub would fit.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Electric Brakes For A 2023 Brinkley Z 3100 5th Wheel With 7k Axles
- Q&A: Replacement Bearing Kit for a # 42 Spindle on a 8,000 lbs Axle
- Q&A: Replacement Hub And Drum Assembly For An 8 Lug Hub With 9/16" Studs
- Q&A: Replacement Brake Assemblies for Trailer with 6,000 lb Dexter Axles
- Q&A: Recommended Valve Stem For 125-130 PSI And TPMS Sensors
- Q&A: What Spindle Fits the Trailer Hub # AKHD-865-8-EZ-K
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)