What Grade Bolt is the # 126A1 3/4 x 3.5 inch Wet Equalizer Bolt
Updated 06/27/2016 | Published 06/25/2016
Question:
What grade are these bolts? I would like to find a 3/4inch grade 8 wet bolt, but a grade 5 would do. Will be used as a front spring eye and shackle bolts for an old truck restoration project. 6500 lb axle rating.
asked by: Mike
0
Expert Reply:
According to the manufacturer, the # 126A1 3/4x3-1/2 inch wet equalizer bolt is a grade 5 bolt.
I've linked you to a product description video for the bolt.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Wet Equalizer Bolt with Castle Nut, Grease Zerk and Cotter Pin - 3-1/2" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3/4 Inch Diameter
- 3-1/2 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Hydraulic Jack Leg That Can Be Used w/a Hydraulic System on a Dump Trailer
- Q&A: Wet Bolt Recommendation For the Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Q&A: What Leaf Springs, U-Bolt Kit, Equalizers, and Wet Bolt Kit do I Need for My Triple Axle Set-Up?
- Q&A: Replacement Hub/Rotor for UFP 41030
- Q&A: 12" Equalizer Kit for Trailer Leaf Springs
- Q&A: Could Redarc Tow Pro Link be Used to Tow Second Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What is the Tradesman Hydraulic A-Frame Trailer Jack Total Travel
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Maintenance Schedule