Installation of Hopkins Custom Tail Light Wiring Kit for Towed Vehicles HM56202

Updated 02/01/2016 | Published 01/30/2016

Question:

I DONT SEE THE PLUG TO CONNECT THE PASSENGER SIDE PLUG INTO. IT LOOKS LIKE THE PURPLE WIRE ON THIS SIDE GOES UNDER THE WHEEL WELL BUT THE PLUG LOOKS VERY DIFFEREN? I HAVE THE 56202 WIRE HARNESS/HOPKINS. 2006 RUBICON.

asked by: JEFF G

Expert Reply:

Hopkins harness # HM56202 for towed vehicles like your 2006 Jeep Wrangler Rubicon installs at the tail light assemblies using the included custom-fit connectors. The connectors/wiring with a yellow wire attach at the driver's side light. The connectors/wiring with the green wire install at the passenger side tail light assembly.

The only other wire to be connected is the white ground wire with ring terminal. This connects using the include self-tapping screw to a clean bare metal surface on the Jeep.

If one of the factory connections on the harness has come loose, just re-join those two connectors and tape securely.

expert reply by: Adam R