Trailer Leveling Device for Tandem Axle Trailer

Question

Question:

1. Do you have any ramps similar to this but with a longer level area, I.e. For a dual axle? We need about 36 2. Why cant it be used on only one side of a vehicle to level it? We park our 22 ft trailer on a area that slants, and we need to park it level. Right now were using boards to raise up one side to make it level. Seems like something like this ramp would be perfect, if only both wheels would fit! Thank you!

asked by: Elaine

0

Expert Reply:

The FloTool RhinoRamps Vehicle Ramp Set # FT11909MI is intended for use when servicing a vehicle such as a car, truck, or SUV. This item is not intended for use as a trailer leveling device but we do offer these too.

Andersen's Camper Wheel Chock and Leveler # AM3604 provides leveling at any increment from 1/2-inch up to 4-inches and it is ideal for tandem axle trailers up to 30K weight. The linked videos illustrate.

expert reply by: Adam R

0

Answer 1

Thanks for the picture! A standard 20 lbs propane tank is just under 18" tall so the DeeZee Specialty Series Trailer Tongue Tool Box item #DZ91717P is not going to work because it is only 17" tall. A standard 20 lbs propane tank is…

view full answer...

Answer 2

You're looking for the Roadmaster Front Anti-Sway Bar #RM67MR, which is a confirmed fit for your 2022 International MV607 Chassis. As for the shocks, we don't currently carry replacements or enhancements that are compatible with liquid…

view full answer...

Answer 3

Hey Doug! The closest thing we have to what you're asking for is the 1-1/4" to 2" Trailer Hitch Adapter item #e93YR. This has a 5" rise and most likely won't work for your Camry for the same reason what you're asking for…

view full answer...

Answer 4

We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers #BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style.…

view full answer...

Answer 5

The Reese Replacement Rubber Bumpers #30536 are intended for the side of the hitch closest to the cab. The pin head screw goes through the center of the rubber bumper and a speed nut goes through the bottom. I have provided links to the installation…

view full answer...

Answer 6

Overall length is just under 1 inch, it is .983 inches. Diameter of the base is all just under an inch at .987 inches. It is designed to fit a Reese 16K hitch, part #RP30047.

view full answer...

Answer 7

We have two front mount receivers available for a 2004 F-450 cab and chassis. They are Draw-Tite part #65022 and Curt part #31114. I have added links to these parts and their install instructions below. I did some geometry with your 8 on 9 inch lug…

view full answer...

Trailer Leveling Device for Tandem Axle Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching