Changing Hubs with 4x100 Wheel Bolt Pattern for Hubs with 4 on 4 Wheel Bolt Pattern
Updated 11/09/2015 | Published 11/07/2015 >
Question:
Hi, I hope you can help. I have a small Thule trailer that needs replacement hubs, the current hubs are Al-ko 4 x 100, and the numbers forged on the hub is LV1, then right under that, 1311409, then on the other side, 1885. The outer bearing is LM11749 and the inner bearing is LM45449 I would like to replace with a 4 x 4” free hub, it is easer find with USA standard wheels. So my question is: what p/N would replace this, is there a complete hubset replacement kit, or do I need to replace the axle with new hubs. I would appreciate your assistance.
asked by: Andrew P
Expert Reply:
Your best option is going to be to replace both the axles and the hubs. We unfortunately do not have any hub that use the same inner and outer bearings as your current hubs.
If you decide you want to replace your trailer axle, the Timbren Axle-Less Trailer Suspension System with Hubs - 4 on 4 - Regular Tires - 1,200 Pounds # A12RS440 is a great option. This system doesn't use a traditional through axle, but rather works independently on each side and will fit any frame width trailer.
The suspension system # A12RS440 features rebound springs that act as return devices to minimize rattle and bottoming out. EZ Lube spindles make it easy to grease the bearings without removing the trailer hub. To install the system, either bolt or weld each unit to the side of your trailer.
This suspension system uses hubs that have a 4 on 4 wheel bolt pattern and use common inner and outer bearings. The system has a weight capacity of 1,200 pounds.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 1200 lbs
- 4 on 4 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: Does Dexter Trailer Idler Hub Assembly for 12,000-lb Axles Come with Spindle Nut
- Q&A: Dimensions of the Timbren Axle-Less system part # A12RS440
- Q&A: Is It Possible to Add an Axle to a Single Axle Trailer
- Q&A: Dexter D120 Axle Replacement Parts
- Q&A: Axle Kit for Fabricated Ice House Trailer
- Article: Where to Position the Trailer Axle?
- Q&A: Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt Pattern
- Q&A: Availability of 2,000 Pound Timbren Axle-Less System with 6 Hub Face Dimension
- Article: How to Measure a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How Long will the Axles Last on my Boat Trailer?
- Article: Best Boat Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: Which Sway Control Hitch is Right For Your Trailer?

