Can 4-Pole Round Connector Be Installed on Hopkins Flat Towing Wiring Harness on 2015 Wrangler

Updated 09/19/2015 | Published 09/18/2015

Products Featured in This Question

Blue Ox Base Plate Kit - Removable Arms

(5201)

$609.00

Blue Ox 7-Wire to 4-Wire, Coiled Electrical Cord - 7' Long

(103)

$92.26

Question:

Once I install HM56200 and purchase bx88254 do i just cut the flat four way off and install the supplied end that comes with the bx88254?

asked by: Thomas S

Expert Reply:

That's correct. The Blue Ox # BX88254 Coiled Electrical Cord does included a 4-pole round connector. You can simply cut off the 4-pole flat on the Hopkins wiring harness and replace it with the 4-pole round connector.

If you use the Blue Ox # BX1126 base plate, it actually has a mount for the connector built onto it, as shown in the provided photo.

I'll link you to some FAQ articles you might find helpful, as well as to videos showing the Hopkins wiring harness and the base plate kit you mentioned being installed.

expert reply by: Mike L