Inner Width of Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 3/4" Shaft  

I would be happy to help! The CE Smith Ribbed Wobble Roller for Boat Trailers - PVC - 4" Diameter - 3/4" Shaft - Amber #CE29536 you were looking at has a 3/4" diameter hole that is 5/8" thick. I included a video of the #CE29536…

We have a few options for replacement rollers that fit 3/4" roller shafts. The Yates Ribbed Wobble Roller #YR530R-6P is 3" wide, 5" in diameter, and fits 3/4" shafts. The Yates Ribbed Wobble Roller #YR343R-6P is also 3" wide…

If you have enough of the shaft still intact then you can use the CE Smith Wobble Roller Retainer Ring #CE10981 and a Wobble Roller Washer #CE10983 for the Yates Ribbed Wobble Roller #YR343R-6P for a 3/4" shaft. Otherwise you may need to get a…

The Yates Ribbed Wobble Roller, #YR343R-6P, is 3 inches wide when compared to #YR440R which is 4-1/4 inches wide. If the 3 inch width will still work for your application then you can use it in place of the #YR440R roller.

The Yates Wobble Roller #YR440R that you referenced should work well for you since it has the same 3/4 inch shaft as your trailer. Wobble rollers are held on with retainer rings like the CE Smith Wobble Roller Retainer Ring #CE10981. Basically, you…

The Yates Ribbed Wobble Roller part #YR343R-6P that you have actually uses a 3/4 inch shaft or if you had the part #YR343R-5P the shaft diameter would be 5/8 inch. I'd maybe try measuring the diameter again and going with the wobble roller that…

The hub length of the CE Smith Ribbed Wobble Roller for Boat Trailers part #CE29536 is 3/4" per the manufacturer.

We have the Yates Ribbed Wobble Roller in either a Heavy-Duty Rubber #YR530R-6P or Thermoplastic Rubber #YR500YW-6P. These both are 5" in diameter, 3" wide and fit on a 3/4" shaft. These will both have a 7/8" hub diameter. We do…

I have a solution that might work for you, but the length of the bearing and bushing on the Yates Wobble Roller #YR530R-6P is 1-1/2", so it's going to be the same as the ones you've currently got. You might want to look at the Yates…

Looks like you have the Yates Ribbed Wobble Rollers part #YR530R-6P installed on your Shoreline boat trailer. We do not carry any pieces that are internal of the roller like a bushing if that is what you are referring to. We carry the retainer rings…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…