Installing Tekonsha Voyager Brake Controller on 2001 Ford F150 Using Factory Pigtail
Updated 07/11/2015 | Published 07/09/2015
Question:
I need help hooking my brake with wires that are colored white, green, red and blue to my 2001 F150 Ford.
asked by: Bob
Expert Reply:
It sounds like you have the OEM pigtail that came with the truck. The pigtail would plug into the connector under the dash, and would wire to you Voyager brake controller as follows:
Red pigtail wire to black wire on controller
Green pigtail wire to red wire on controller
White pigtail wire to white wire on controller
Blue pigtail wire to blue wire on controller
I've linked you to an install video that you might find helpful, and I've provided you with a photo showing where the brake controller connector is located under the dash.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Will the HydraStar Electric Over Hydraulic Actuator Part # HS381-8067 Work for Me
- Q&A: Converting Surge Brakes to Electric Over Hydraulic on a Tandem Axle Boat Trailer
- Q&A: Differences Between Marine and Standard Hydrastar Actuators
- Q&A: Parts Needed To Replace Surge Coupler For Disc Brakes With Electric Over Hydraulic