Plug-In Adapter For Tekonsha Voyager And 2012 Ford F-150

Updated 06/11/2015 | Published 06/10/2015

Question:

Hi I am looking for a plug with wires that will plug into my 2012 Ford F-150 wiring. This for my electric brake controller that has individual wires coming out of the back. I want to splice this onto those wires, Can you recommend the correct plug. 7 pin connector Tekonsha Voyager with 4 leads (no connector plug) Battery,brake,stoplight, ground Thanks

asked by: Dave A

Expert Reply:

The Tekonsha Voyager # 39510, typically comes with a connector attached to the wires you said are at the back of the controller. If the plug is present the adapter I recommend is part # 22292.

Since you said there is no plug at the back of the controller and you just have 4 wires you can still use the # 22292 plug-in adapter. You would need to cut the plug off the end of the adapter that would normally attach to the brake controller. You would then be able to plug the other end into the port that can be found under the dash next to the diagnostic port.

I have attached a link to an installation video you can check out.

expert reply by: Jeffrey L