Can a P3 Brake Controller be Installed in a Motorhome with Air Brakes
Updated 06/09/2015 | Published 06/08/2015
Question:
Can this control work with air brakes on my 2012 Titfin Motorhome
asked by: Jay M
0
Expert Reply:
Yes, you can install the Prodigy P3 Brake Controller part # 90195 on a vehicle that has air brakes. When you install this controller on a vehicle it will tap into the brake light circuit to know when to activate and then can sense deceleration to know how much braking power it should apply to the trailer's brakes.
As long as your trailer has electric brakes this controller would work well for you.
I attached a help article on installing a brake controller in a vehicle from scratch for you to check out as well.
expert reply by:
Jameson C
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Does Brake Controller Install in Tiffin Phaeton 40AH
- Q&A: Comparing Aluma-Tow Adjustable Ball Mount To B&W, etrailer, and Trimax
- Q&A: Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Can Redarc Tow Pro Liberty Brake Controller Install 2012 Toyota Sienna LE
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: 5 Things to Know About Weight Distribution Hitches