Brake Controller and 7-Way Installation on 2012 Nissan Pathfinder with 4-Pole Trailer Connector
Updated 04/08/2015 | Published 04/07/2015
Products Featured in This Question
Question:
I have a 2012 Nissan Pathfinder, 4WD with a factory 4 pin connector. I would like to tow a travel trailer and need a brake controller and 7 pin connection. What items would I need to order for this installation?
asked by: Darin A
Expert Reply:
If your 2012 Pathfinder did not come from the factory with a 7-way at the rear bumper, just a 4-pole flat connector, there probably is not be a brake control connection port under the dash. The linked video will illustrate the location of the port on a 2013 Pathfinder that has a factory 7-way. Please refer to the 2:45 mark in the video.
If you do not have the under-dash port you'll simply use installation kit # ETBC7 instead of the quick-connect harness # 3050-P.
The ETBC7 includes wiring, connectors, a 7-way socket and mounting bracket for the truck and even circuit breakers for installing the controller. A circuit tester is included also to allow you to test to find the correct wires for installing the controller. An installation article and video are linked for you.
The brake controller I recommend is the Tekonsha Prodigy P2 # 90885 that you referenced. This is an easy recommendation as this unit is among the most versatile, reliable and easy to set up controllers we offer. It is also highly rated by our customers.
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Does the Curt Base Plate Kit Work w/ the Ford Modular Bumper on a 2025 Ford Bronco Everglade?
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop