Fitting Size of the Camco RV Water Pump Winterization Kit # CAM36543
Published 03/20/2015
Question:
Can you confirm size of connector? Is it 3/8 or 1/2 ??
asked by: Richard W
0
Expert Reply:
I went out into our warehouse and measured the fittings of the part # CAM36543 that you referenced and found that the inner diameter of the T-fitting is right at 1/2 inch whereas the outer diameter of the fitting is 3/4 of an inch.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Camco RV Water Pump Winterization Kit - Permanent
- RV Fresh Water
- Winterize
- Pump Kits
- Brass
- Bypass Kit
- 1/2 Inch
- Threaded
- Camco
more information >
Continue Researching
- Shop: Camco RV Water Pump Winterization Kit - Permanent
- Shop: 3-Way RV Water Heater Bypass Valve - 1/2" MPT x 1/2" MPT x 1/2" MPT
- Q&A: Parts Needed For Installing Water Heater Bypass Valve On PEX Tubing In A Camper
- Q&A: Lift Kit For Dexter #11 Torflex Axles on Airstream Tandem Axle Trailer
- Q&A: Can the Power Mountain Tallboy Off-Road Bottle Jack be Stored Laying Down?
- Q&A: Lube Plate Recommendation for Use with B and W Patriot Fifth Wheel Hitch
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Can The PD5110010Q Transfer Switch Be Mounted Vertically Or Horizontally
- Q&A: Where do I Install the Camco Winterization Kit on my Camper
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How Much Solar Power Do I Need For My RV?
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: How Does an RV Water Pump Work?