The Curt Trailer Hitch Receiver - Custom Fit - Class I #C11681 is a confirmed fit for your 2017 Honda Accord Sedan and at this time there is not a Class II hitch available. If you will be towing with this hitch, I recommend the ball mount #C45521 and…
We have a 1-1/4 inch to 2 inch hitch adapter that is compatible with Class I 1-1/4 inch hitches like the part #HTAD or for a similar setup that provides additional rise you'd want the part #HT5R.
I have a solution for you, but the distance from the hitch pin hole of the Curt adapter part #C45785 to the back of the hitch opening is 2.55 inches so it would not be deep enough for your bike rack. Instead we have the Brophy hitch adapter part…
Hey Dylan, so we have the Brophy hitch expander part #HTAD which is Class I compatible but the adapter you mentioned can only be used with Class II hitches so it wouldn't work for you.
The only way to get the required weight capacity you need for your 2 Lectric e-bikes is by a hitch bike rack. Also, from looking at your bike models, you most likely have front fenders and/or a rear cargo platform on the bikes. From the available…
From the center of the pin hole of the part #HT5R to the back of the upper hitch opening tube measures 3-1/2 inches. You would need to have less than 3-1/2 inches from the pin hole on your hitch out to the furthest point out on the rear bumper. When…
Hey Chris, thanks for reaching out! I checked with out manufacturers and unfortunately it looks like the only hitch receiver sizes designed to fit your 2024 Honda Accord are the smaller 1-1/4" receivers. You can technically use a hitch adapter…
The Curt Trailer Hitch, part #C11681 will work well for your 2015 Honda Accord. This is a Class l hitch and it has a 1-1/4 inch receiver opening. Per Curt all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with…
I do have a solution for you but using a hitch adapter like #HT5R, reduces your hitch capacity by 50 percent, so it's not ideal. The best option I can offer is the Curt Cargo Carrier #C18110, which has a shank with a built in rise of 3-3/4…
I have a different option for you, but I do not recommend using the Hitch Adapter #HT5R with the Curt Trailer Hitch Receiver #C11681 for your 2016 Honda Accord Sport Coupe as it will reduce the tongue weight rating of the hitch by 50% which will give…
To install a hitch like the Curt Hitch part #C11681 that you referenced on your 2015 Honda Accord you will need to trim the heat shield. For more info on that check out the install video and installation instructions I attached.
Currently the only receiver options for your 2021 Honda Accord Touring 2.0T sedan are class I, 1-1/4" receivers like the Curt #C11525. The EcoHitch Receiver #306-X7299 you found will only fit older Crosstour models. While we do have an Adapter…
