New Arrivals
Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- Dexter
Dexter 520 Dump Trailer Power Hoist Kit
Dump trailer power hoist lifts the trailer bed for easy unloading. Kit includes hydraulic power unit, hoist assembly, hoses, fittings, safety arm, battery cables, and hardware.
- Dump Trailer Parts
- Lifting System
- Power Hoist Kits
- Dexter Axle
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - E-Z Lube - Qty 1
In Stock
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Dexter Dual Hydraulic Jack Add-On w/ Selector Valve - 12,000 lbs
In Stock
Smooth and powerful hydraulic jacks upgrade your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
- Trailer Jack
- Dump Trailer
- 5th Wheel Trailer
- Gooseneck Trailer
- Enclosed Trailer
- Side-Mount Jacks
- 10001 lbs or More
- Hydraulic Jack
- Weld-On
- With Rectangle Foot
- Dexter
Dexter Trailer Power Tilt Deck Kit - Welded - 3x10 Cylinder Assembly
Welded, power tilt deck kit makes loading and unloading vehicles easier without ramps. Includes hydraulic power unit, battery strap, cylinder assembly, hydraulic hoses, battery cables, supports, and safety signs.
- Dump Trailer Parts
- Lifting System
- Tilt Deck Kits
- Dexter Axle
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K E-Z Lube - 8 on 6-1/2 - Qty 1
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Horse Trailer Butt Bar Pad - 29" Long
Keep your horse safe and comfortable with this cushioned butt bar pad. The 2" thick foam absorbs impact, while the durable vinyl cover easily wipes clean.
- Horse Trailer Accessories
- Protectant Pads
- Butt Bar Pad
- 29 Inch Long
- Vinyl and Foam
- Redline
Dexter Fortress Bolt-On Aluminum Oil Cap Kit - Fits 9K12K Axles - Black Coated - 6-Bolt Install
Upgrade to the Dexter Fortress oil cap kit for secure hub sealing and easy maintenance. Designed for 9K12K axles, this bolt-on cap includes gasket, plugs, and hardware, and works with both oil and grease lubrication systems.
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 10000 lbs Axle
- 12000 lbs Axle
- 9000 lbs Axle
- Dexter
Dexter Bearing Kit for 9K - 10K Axles - Inner and Outer Bearings 387A/25580
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 2.88 Inch I.D.
- Bearing 387A and 25580
- Race 382A and 25220
- 7200 lbs Axle
- 8000 lbs Axle
- Dexter
Dexter Hydraulic Trailer Brakes - Free-Backing - 10" - Left/Right - 3.5K
Kit includes left- and right-hand 10" x 2-1/4" hydraulic drum brakes. Free-backing design prevents drag when reversing. Corrosion-resistant build fits 3,500-lb axles with 13" to 15" wheels.
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- Dexter
Dexter Grease Caps with 2.446" OD - Fits 12" x 2" Hubs - Zinc-Plated Steel - Qty 2
In Stock
Protect your trailer's bearings with these 2.446" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in fit installs easily. Designed for 12" x 2" Dexter hubs with 4-, 5-, or 6-bolt patterns. Includes 2 caps.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.44 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- Dexter
etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum
In Stock
A high-quality soft, roll-up tonneau cover at this price? You bet. It may not have all the fancy extras that some of the other national brands have, but if you're looking for the best value for your money our etrailer cover can't be beat.
- Tonneau Cover
- Roll-Up - Soft
- Not Rack Compatible
- Opens at Tailgate
- Tailgate Lock
- Aluminum and Vinyl
- Vinyl Grain
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
etrailer RV Enclosed Cargo Carrier Kit with Cover - 60"
In Stock
You're packed for the weekend, the RV is full, but the cooler and lawn chairs won't squeeze in. This kit solves that with a lockable carrier, an enclosure cage, and a weather-resistant cover to keep your cargo dry, clean, and out of sight.
- RV Cargo Carrier
- Cargo Carrier
- Bumper Mount
- 440 lbs
- Fixed
- 24 Inch Deep
- Steel
- etrailer
Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 5,000 lbs
In Stock
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes sidewind handle.
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Standard Grade
- 4001 - 5000 lbs
- Manual Jack
- Weld-On
- With Rectangle Foot
- etrailer
etrailer 2 Swivel Jacks w/ Bolt-On Mounting Plates - Sidewind - 10" Travel - 3,000 lbs
In Stock
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- Car Hauler
- Side-Mount Jacks
- Swivel Jacks
- Standard Grade
- 2001 - 3000 lbs
- Manual Jack
- Bolt-On
- With Rectangle Foot
- etrailer
etrailer Invisible Base Plate Kit - Removable Arms
In Stock
Stay sleek when not towing! These hidden base plates offer a clean, factory look and quick twist-on arm connection. Easy, bolt-on install with all hardware included.
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- etrailer
etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum
In Stock
A high-quality soft, roll-up tonneau cover at this price? You bet. It may not have all the fancy extras that some of the other national brands have, but if you're looking for the best value for your money our etrailer cover can't be beat.
- Tonneau Cover
- Roll-Up - Soft
- Not Rack Compatible
- Opens at Tailgate
- Tailgate Lock
- Aluminum and Vinyl
- Vinyl Grain
- etrailer
etrailer Scissor Stabilizer Jack - 24" Lift - 7,500 lbs - Qty 1
In Stock
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.
- Camper Jacks
- Trailer Jack
- RV Motorhome
- Travel Trailer
- 5th Wheel Camper
- Teardrop Camper
- Pop Up Camper
- Scissor Jacks
- Steel
- 7001 - 8000 lbs
- Manual Jack
- Bolt-On
- 1 Jack
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - Preorder
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 900 lbs WD TW
- Concealed Cross Tube
- etrailer
etrailer Invisible Base Plate Kit - Removable Arms
In Stock
Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 7500 lbs GTW
- 8000 lbs WD GTW
- 800 lbs WD TW
- Concealed Cross Tube
- etrailer
etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
In Stock
We've been there - the rattles, the clanks, the frustrating swaps - so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Steel
- Fits 2 Inch Hitch
- Towing Anti-Rattle
- Accessory Anti-Rattle
- etrailer
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
In Stock
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 89 Inch Hub Face
- No Drop or Lift
- etrailer