New Arrivals

Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 900 lbs TW
• 6000 lbs GTW
• 6000 lbs WD GTW
• 900 lbs WD TW
• Concealed Cross Tube
• etrailer

Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.

• Tow Bar Base Plate
• Removable Draw Bars
• Twist Lock Attachment
• Completely Hidden
• etrailer

Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 750 lbs TW
• 7500 lbs GTW
• 8000 lbs WD GTW
• 800 lbs WD TW
• Concealed Cross Tube
• etrailer

We've been there - the rattles, the clanks, the frustrating swaps - so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.

• Hitch Anti-Rattle
• Standard Anti-Rattle
• Universal
• Steel
• Fits 2 Inch Hitch
• Towing Anti-Rattle
• Accessory Anti-Rattle
• etrailer

Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Standard Grade
• No Hubs
• 3500 lbs
• Spindles Only
• 89 Inch Hub Face
• No Drop or Lift
• etrailer

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 4200 lbs Axle
• 5200 lbs Axle
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 15123 and 25580
• Race 25520 and 15245
• 6000 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

This 3-quart hydraulic pump makes operating dump trailers and other systems easy, letting you lift, lower, or let things down by gravity. It comes with a handy handheld pendant with a removal cord and start solenoid.

• Dump Trailer Parts
• Hydraulic System
• Hydraulic Pumps
• 3 Qt
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• For 5200 lbs Axles
• For 6000 lbs Axles
• 8 on 6-1/2 Inch
• 17 Inch Wheel
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Round trailer axle beam measures 91" from hub face to hub face and 74-1/2" from spring center to spring center. E-Z Lube spindles simplify bearing maintenance. Axle includes welded spring seats, brake flanges, and spindles.

• Trailer Axles
• Leaf Spring Suspension
• Standard Grade
• No Hubs
• 4400 lbs
• Spindles Only
• 91 Inch Hub Face
• No Drop or Lift
• Dexter

Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• 5th Wheel Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Standard Grade
• Dexter

Tilt deck kit makes loading and unloading vehicles easier without ramps. Includes cylinder assembly, hydraulic fittings, supports, clamps, hinges, and safety signs.

• Dump Trailer Parts
• Lifting System
• Tilt Deck Kits
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• Oil Bath
• ABS
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• 16 Inch Wheel
• 17 Inch Wheel
• Dexter

Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.

• Trailer Brakes
• Disc Brakes
• Marine Grade
• 5 on 4-1/2 Inch
• Rotor
• 3500 lbs Axle
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 02675 and 25580
• Race 25520 and 02420
• 8000 lbs Axle
• 7200 lbs Axle
• Dexter

Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• 7000 lbs Axle
• Dexter

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• 5th Wheel Trailer
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.

• Trailer Suspension Parts
• U-Bolt Plates
• Snowmobile Trailer
• Boat Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• Dexter

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16 Inch Wheel
• 17 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Get smooth, reliable braking with this Dexter hydraulic drum brake kit. Designed for 9K-10K axles, these self-adjusting brakes reduce maintenance while delivering strong stopping power. Assemblies include parking brake levers for extra control.

• Trailer Brakes
• Hydraulic Drum Brakes
• Standard Grade
• Dual Servo
• Self Adjust
• 12-1/4 x 3-3/8 Inch Drum
• 9000 lbs Axle
• 10000 lbs Axle
• 16 Inch Wheel
• 15 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Marine-grade hub is designed for use on trailer idler axles. Fits 4,2500-lb axles. Requires inner bearing (L68149) and race, outer bearing (L68149) and race, grease seal, grease cap, and lug nuts (not included). Galvanized finish is rust resistant.

• Trailer Hubs and Drums
• Idler Hub
• Standard
• L68149 / L68149
• Marine Grade
• For 4200 lbs Axles
• 5 on 4-1/2 Inch
• 14 Inch Wheel
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 13 Inch Wheel
• 16-1/2 Inch Wheel
• 16 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 1.23 Inch I.D.
• Bearing L44643
• Race L44610
• 2000 lbs Axle
• Dexter