Tired of your trailer tossing you around? Curt's Helux pin box smooths things out with a tough coil spring that beats air bags and torsion setups. It's maintenance-free, easy to use, and won't put your RV's frame warranty at risk.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.
B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.
Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.
Coming soon! Already have a cargo carrier? Turn it into an enclosed hauler with this lockable cage add-on. Front-load your gear, skip the straps, and keep it covered, so the next pit stop isn't a gamble, and your road trip stays focused on fun.
This ball mount platform replaces the one from your Weigh Safe 180 Pro ball mount for your 2" hitch. Platform slides along the shank so you can match the height of your trailer. Double-sided tow ball makes switching sizes a breeze.
Need a thermostat for your ducted Furrion Chill Cube RV AC setup? This single-zone, wall-mounted unit lets you view and adjust the fan speed, mode, and more.
This user-friendly wall thermostat provides accurate temperature control when used with your Dometic single-zone air conditioning unit (sold separately). Clear digital screen displays current settings. Control box included.
Steel shank allows you to connect almost any weight distribution system. The shank measures 8" long from the center of the hitch pin hole to the center of the adjustment holes. Adjustable height to level with trailer. Fits 2-1/2" receivers.
Need an air distribution box for your ductless Furrion Chill Cube RV AC setup? This low-profile unit includes a remote control that can sense and adjust the temperature of the area in your RV that the remote is in.
This user-friendly wall thermostat provides accurate temperature control when used with your Dometic single-zone air conditioning unit (sold separately). Clear digital screen displays current settings. Control box included.
Replaces the stainless steel top panel and glass cover for your Furrion 2-in-1 range oven (FGR21G3A2-BG). Includes flat exhaust vent, tray module, and side trim kit.
This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the top.
Install or remove your oil or grease cap with this aluminum alloy wrench. Long, angled handles let you apply more force to get stuck caps unstuck. Impact points on ends make it easy to whack with a mallet. Fits 2-1/4" and 2-1/2" hex caps.
Stackers lock together like building blocks, making them a versatile tool when setting up your camp. Use as pads for jacks and stabilizers or build a ramp shape to level your RV. Includes 10 rectangular Stackers and storage bag.
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.
Maintain the charge of your towed car's battery from your coach or tow vehicle with this simple harness. 12V Power line with in-line charger connects to the 6-way or 7-way plug on your vehicle. Troubleshoot with the simple LED indicator.
Replaces the secure core keys for the end caps on your Rhino-Rack Vortex Aero crossbars. Works with all Rhino-Rack Vortex Aero crossbars. Includes 2 keys.
Keyed alike lock set includes anti-rattle hitch lock to secure your 2" hitch-mounted bike rack to your hitch, 10' cable lock to secure your bike to the rack, and extension lock for Benton 4-bike platform rack.
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
