Steel shank allows you to connect almost any weight distribution system. The shank measures 8" long from the center of the hitch pin hole to the center of the adjustment holes. Adjustable height to level with trailer. Fits 2-1/2" receivers.
We love how handy this tool bag is. The zippered top opens wide so you can get your stuff in and out easily. There are handles on both the top and on the side, and the material blocks out water. Keeps all your towing accessories in one place!
Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.
Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.
If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.
Deter wobble and get maximum stability as you tow with this stabilizer kit. Insert the shank end into one of the 2-1/2" stacked receivers on your Gen-Y adjustable ball mount and attach the brackets on the other end to your vehicle's frame.
Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 4-step with 23-1/2" treads. Applies quickly and easily with adhesive backing.
The polyurethane bushings built into this adjustable channel mount absorb vibration, reduce road shock, and decrease trailer bounce for a smoother ride. Bolts into the adjustable channel on your trailer with the included bolts.
Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.
Tired of cleaning up sticky drinks or runaway leftovers after a travel day? This GE travel latch keeps your fridge doors shut tight while you're on the road. It installs fast with included screws and helps prevent messes before they happen.
Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.
You're swapping out your RV's AC and need the rest of the system to match. This installation kit from GE Appliances gives you the air distribution box, wall thermostat, and control board you'll need to complete a ductless setup.
You can't be a BBQ champ if the wind is stealing the show! The TailGater windscreen is like a bouncer for your grill, kicking out unruly gusts. It keeps your burgers sizzling evenly - no more rare-in-the-middle, charred-on-the-edges disasters.
This is a rave-worthy upgrade for your RV. It extends far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Feels sturdier and looks better than what you're used to.
Replaces the #05 rubber shear spring on MORryde's rubber pin boxes for trailers between 14,001 - 18,000 lbs GVWR. Helps absorb and dampen road shock, vibration, and reduces chucking. Installs on the skid pad with your existing hardware.
If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.
Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.
Maintain the charge of your towed car's battery from your coach or tow vehicle with this simple harness. 12V Power line with in-line charger connects to the 6-way or 7-way plug on your vehicle. Troubleshoot with the simple LED indicator.
10-1/2" x 13-3/4". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.
Filter Results
