Radial tire has a ply rating of 6 and a 1,820-lb maximum load at 50 psi. The 15" diameter x 5" wide steel trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion resistant, silver powder coat finish.
Use your gooseneck ball to tow your 5th wheel with this lightweight hitch easy to drop in, easy to pull out, and no heavy lifting. The offset base is made to fit truck beds with toolboxes or fuel tanks, ensuring a perfect fit and hassle-free towing.
This dolly kit makes moving your snowmobile on dry ground simple, allowing you to travel up to 12 mph. It fits various ski types, and it protects your carbides and floors from damage. Plus, installation is quick and easy with a spring-loaded hook.
Mount this air compressor behind your Ranger's back seats so you can run air lockers or air up your tires after a long day on the trail. Hardware, plumbing, and electrical components included.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion.
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.
B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.
Tackle crosswinds, rough roads, and heavy loads with confidence. This system includes built-in friction to limit sway and motion-dampening chains to keep your rig from bouncing so you can tow with less stress and more control.
Sturdy, secure fifth-wheel hitch features an adjustable height to fit your towing needs. Dual-pivot head includes Permalube bushings, a slide-bar jaw and an anti-rattle skid plate for a smooth, quiet ride. Rails and installation kit included.
TowSmart's fully welded hitch bolts onto your vehicle. The receiver sits beneath the bumper for easy cargo access. Built from powder-coated steel, it resists rust and corrosion for lasting durability. Perfect for towing and hitch-mounted gear.
Be seen with this 3/4" round LED. The amber diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
You're the one with the welcome mat out and the good vibes on tap. This cooler? Just part of the magic. It says come as you are, bring what you like and means it. Because around here, the drinks are cold, and everyone's invited.
Transform your truck bed into a cozy fortress with the Sportz truck bed tent. It sets up in minutes, keeps critters out, and turns any parking spot into your own private campsite. Plus, the awning is your VIP lounge for relaxing and sipping drinks.
The dual jaw on this hitch offers a secure connection with 360-degree jaw-to-king-pin contact. Durable polyurethane bushings limit rattle and vibration. Base adjusts for ideal vertical and fore/aft positioning. Custom installation kit included.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion. Mounting bracket for wiring is welded on for a clean look.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen.
Custom designed to fit your vehicle so it can be safely towed behind your RV, this base plate has easily removable arms that offer a seamless look when you're not flat towing. Base plate bolts directly to your chassis, so no welding is required.
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
Filter Results
