Radial tire has a 10-ply rating and a 3,197-lb max load at 90 psi. Hub-piloted steel wheel has an 8 on 6.5 bolt pattern and a 4.77" offset. Can be either the inner or outer wheel of a dual-wheel setup on your trailer.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,400-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Hitch slides automatically as you drive to give you 22-1/2" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking.
This aerodynamic Thule roof rack mounts flush on your roof for a sleek, factory look. Crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs to flush rails on your vehicle's roof.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen. Made of rustproof aluminum.
Center cap fits your steel trailer wheel with a 4.25" - 4.27" diameter pilot hole. Stainless steel construction is corrosion resistant. Removable snap-in plug provides easy access to your E-Z Lube axle for maintenance.
Tire has all-steel belts and deep, rugged tread with a 14-ply rating. 4,080-lb Max load at 110 psi. The 16" x 6" steel trailer wheel has an 8 on 6-1/2 bolt pattern. Black powder-coated finish is rust resistant.
Trust in faster braking response and improved control for your longer 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.
The Tekonsha P3 is a brake controller beloved for its reliability and useability. You're able to save your settings and multiple profiles. It's easy to install, and with the custom harness, it's plug-and-play.
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
TowSmart's fully welded hitch bolts onto your vehicle. The receiver sits beneath the bumper for easy cargo access. Built from powder-coated steel, it resists rust and corrosion for lasting durability. Perfect for towing and hitch-mounted gear.
13" x 4-1/2" Trailer wheel has an 5 on 4-1/2 bolt pattern and a 3.19" pilot diameter. Rustproof aluminum wheel features a bold design in glossy black with machined silver accents.
Replace the standard waste valve on your RV's gray-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included.
Standard-duty winch with 1.6-hp, permanent magnet motor and mechanical brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Hand-held remote and handlebar rocker mount included.
This 12" x 4-1/2" trailer wheel has 5 on 4-1/2 bolt pattern with a 3.19" pilot hole diameter. This black, rustproof aluminum wheel features an split-spoke design with a machined face.
Custom designed to fit your vehicle so it can be safely towed behind your RV, this base plate has easily removable arms that offer a seamless look when you're not flat towing. Base plate bolts directly to your chassis, so no welding is required.
This aerodynamic roof rack mounts flush on your roof for a factory look. Crossbars with push-down rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.
USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.
Filter Results
