New Arrivals

You found the right spot and need your boat to stay put. This pre-rigged, floating anchor line clips on fast, resists twisting, and gives you 50' of solid braid thats easy to coil and tough enough for the weekend grind.

• Accessories and Parts
• Boat Anchor
• Anchor Line
• 50 Feet Long
• Attwood

Loose batteries cause wiring problems and shorts in your boat or RV. This tray fits 27 or 27M series batteries and keeps them secure, so you do not have to worry about bouncing batteries or losing power on the water or on the road.

• Accessories and Parts
• Battery Boxes
• Battery Trays
• Attwood

Ever watched your boat drift while you're trying to relax or cast a line? This chain adds just enough weight to help your anchor bite fast and stay put so your boat holds steady while you focus on the water.

• Accessories and Parts
• Boat Anchor
• Anchor Chains
• Attwood

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton

Replaces the anti-rattle hitch pin for your Benton rack (B54VR, B82FR, B54FR, B34FR, and B94FR).

• Accessories and Parts
• Hitch Bike Racks
• Pins and Clips
• Pins
• LittleShift
• Shifts&Grins
• ShiftShow
• Benton

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

Eliminate the need for blocks with this trailer jack foot designed for XO750 Ark Xtreme off-road jacks. Foot stand extends your jack height, and protects your tires from compressing over prolonged storage times. Increases jack height by 3".

• Accessories and Parts
• Trailer Jack
• Jack Foot
• Ark

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

This replacement base fits your B&W Companion fifth-wheel trailer hitch. Adjustable arms have polyurethane bushings for hitch head (sold separately) to ride on, resulting in less rattle and noise.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.

• Accessories and Parts
• Gooseneck Hitch
• Hitch Only
• 30000 lbs GTW
• Turnover Ball Gooseneck
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Replaces the Command Center smart tablet for your RVibrake 3 portable flat-tow braking system (50MG0004).

• Accessories and Parts
• Flat Tow Braking System
• Controllers
• Tablet
• CURT

Replace a damaged or worn spring bar on your Curt TruTrack 2P system with this forged steel bar. Designed for 5,000-lb to 8,000-lb setups only (17599). Restores sway control and load leveling for safer, more stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Sqaure Bar
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replace your lost or damaged Curt RVibrake Command Center tablet. Direct replacement restores full monitoring and control of your RVibrake system.

• Accessories and Parts
• Flat Tow Brake System
• Controllers
• Tablet
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Replaces the heavy-duty L-pins and clips from your Curt TruTrack 2P trunnion weight distribution system with integrated active sway control (17355) or support brackets (17517, 17518, and 17519).

• Accessories and Parts
• Weight Distribution Hitch
• Pins and Clips
• CURT